186 Agilent 7100 Capillary Electrophoresis System User Manual
7 Hardware Information
Analog to Digital Converter
Analog to Digital Converter
Some detectors (for example CCD detectors) require an intermediate interface
to convert analog data into a digital format that can be sent to the
ChemStation (Analog In). The Agilent 7100 Capillary Electrophoresis System
has a 20-bit AD converter built in. It enables voltage conversions ranging from
0V to 1V.
You can set up name, units and conversion factors for the analog in signal
from the following dialog which is accessible under Instrument/configuration,
CE-part configuration, see Figure 56.
To Next Page
Loading...
