Agilent 7100 Capillary Electrophoresis System User Manual 179
Hardware Information 7
Diode Array Detector
Diode Array Detector
You can control external devices as part of the method through the relay
contact connectors on the rear of your instrument.
The DAD is directly controlled by the DAD diagram, through method
parameters and general control settings.
Direct control of the DAD and control through method parameter is described
in Controlling the Agilent CE instrument (“Detector Parameters” on page 107)
and the section “User interface” in the ChemStation online help.
To Next Page
Loading...
Need help?
General
