Agilent 7100 Capillary Electrophoresis System User Manual 3
In This Guide…
This guide contains information to install and operate the
Agilent 7100 Capillary Electrophoresis System.
1 Introduction
This chapter gives an introduction to the instrument,
instrument overview and internal connectors.
2 Site Requirements and Specifications
This chapter provides information on environmental
requirements, physical and performance specifications.
3 Installing the Instrument
In this chapter you will find information about how to unpack
and to set up the Agilent CE and information about the
configuration of Instrument.
4 LAN Configuration
This chapter provides information on connecting the CE
instrument to the Agilent ChemStation PC.
5 Using the Agilent 7100 Capillary Electrophoresis System
This chapter provides information on how to set up the CE
instrument for an analysis and explains the basic settings.
6 Troubleshooting and Diagnostics
This chapter gives an overview about the troubleshooting and
diagnostic features and the different user interfaces.
7 Hardware Information
This chapter describes the instrument in more detail on
hardware and electronics.
8 Maintenance
This chapter describes the maintenance of the CE instrument.
To Next Page
Loading...
Need help?
General
