Agilent Technologies Bravo Platform User Manual

5 Using diagnostics software
Performing a task using Bravo Diagnostics
102 Bravo Platform User Guide
c To start the process, click Execute command.
To stop a process before completion, click Stop motors to stop the movement
of the Bravo head. To re-enable the motors, click Enable all motors on the Jog/
Teach tab.
Alternatively, you may click the emergency-stop button on the pendant to stop
the diagnostic process.
Related information
Command to execute Parameter description
Aspirate “Aspirate task parameters” on page 247
Assemble Vacuum
Disassemble Vacuum
“Vacuum Filtration Station task
parameters” on page 261
Dispense “Dispense task parameters” on page 250
Dispense to Waste “Dispense to Waste task parameters” on
page 252
Mix “Mix task parameters” on page 255
Pump Reagent “Pump Reagent parameters” on
page 258
Shake “Shake task parameters” on page 259
Tips On
Tips Off
No parameter settings
Move and Filter Plate “Vacuum Filtration Station task
parameters” on page 261
Wash Tips “Wash Tips task parameters” on
page 264
Pin Tool “Pin Tool task parameters” on page 268
Bravo 96AM Head only
AM Aspirate “AM Aspirate task parameters” on
page 271
AM Cartridges On
AM Cartridges Off
No parameter settings
AM Dispense “AM Dispense task parameters” on
page 276
AM Mix “AM Mix task parameters” on page 281
AM Wash Syringes
For information about... See...
Bravo task parameters “Processes tab quick reference” on
page 243
Setting up the Bravo Platform “Workflow for setting up the Bravo
Platform” on page 16

Agilent Technologies Bravo Platform Specifications

General

Brand	Agilent Technologies
Model	Bravo Platform
Category	Laboratory Equipment
Language	English