229
E Diagnostics quick reference
External Robots tab quick reference
Bravo Platform User Guide
External Robots tab quick reference
About this topic
This topic provides a reference for the External Robot tab in Diagnostics. Read this
topic if you have a Bravo Platform that is integrated in a system with other plate-
handling robots.
Procedures
The External Robot tab provides the controls for configuring how an external robot
can access the Bravo deck. You can configure whether to permit only one robot to
operate on the Bravo deck at any given time or to allow concurrent operation.
For configuration procedures, see “Configuring external robot access” on page 46.
Contents
The External Robot tab contains the following controls and indicators:
Control or indicator Description
Prevent Bravo operation
during external robot
access
Enables and disables the concurrent operation of the
Bravo robot while an external robot accesses the
Bravo deck.
• Select the check box to disable concurrent
operation and to move the Bravo head to a
specified safe location on the deck during the
external robot access.
• Clear the check box to enable concurrent
operation.
Move Bravo to this safe
location
Allows you to specify the deck location where the
Bravo head will move if an external robot is accessing
the Bravo deck.
Current safe location Displays the selected safe location.
Deck location Selects a location on the Bravo deck.
Does an external robot
access this location?
Specifies whether the selected deck location may be
accessed by an external robot.
External robots Specifies which external robots may access the
selected deck location.
Select the locations that
should be blocked during
robot access
Allows you to specify locations on the Bravo deck
where the Bravo robot is prohibited from moving
during the external robot access.
To Next Page
Loading...
Need help?
General
