73
4 Maintenance and troubleshooting
Replacing the fuse
Bravo Platform User Guide
5 Repeat step 2.
6 While the Bravo is in motion, interrupt the Light Curtain and ensure that the
Bravo head stops moving.
Related information
Replacing the fuse
About this topic
This topic describes how to replace the main fuse in the Bravo Platform.
Before you start
A blown fuse can indicate more serious problems. If the new fuse blows after
replacement, contact Agilent Automation Solutions Technical Support.
Using an incorrect fuse can damage the Bravo Platform. Ensure that you have the
correct fuse for the device.
For fuse specifications, see the corresponding safety and installation guide for your
Bravo model:
• G5562A, G5563A Bravo Platform Safety and Installation Guide
• Earlier model Bravo Platform: Bravo Automated Liquid Handling Platform Safety
and Installation Guide
You can order fuses from Agilent Technologies.
For information about... See...
Initializing the Bravo Platform “Initializing the device” on page 31
Tips Off task in Bravo Diagnostics “Performing a task using Bravo Diagnostics”
on page 100
Bravo safety equipment Safety and installation guide for your model
Bravo Platform, for example, G5562A, G5563A
Bravo Platform Safety and Installation Guide
To Next Page
Loading...
Need help?
General
