57
3 Preparing for a protocol run
Planning for the protocol run
Bravo Platform User Guide
To recover from an emergency stop:
1 Turn the red button on the emergency-stop pendant clockwise to release it.
2 In the VWorks message box, click one of the action buttons to re-enable the
motors in the head.
Related information
Planning for the protocol run
Reviewing the protocol
Before you start a run, make sure you review the protocol and determine the
following:
• The correct liquid-handling head is installed.
To avoid variability problems, use only Agilent Technologies brand tips.
• The accessories and labware required for the protocol are where they should be
positioned.
• The reservoirs that must be filled.
If you want to… Then click…
Abort the command or task Abort
Attempt re-execution of the command or task Retry
Ignore the current command or task and proceed to the next
command or task
Ignore
For information about… See…
Pausing and continuing a run VWorks Automation Control User Guide
Safety hazards • Automation Solutions Products
General Safety Guide
• Safety and installation guide for your
model Bravo Platform, for example,
G5562A, G5563A Bravo Platform
Safety and Installation Guide
Reporting problems “Reporting problems” on page 87
To Next Page
Loading...
Need help?
General
