217
D AssayMAP Bravo Platform
Opening the Workbench and accessing the utilities
Bravo Platform User Guide
About the System Startup/Shutdown utility
The System Startup/Shutdown utility consists of two protocols:
• Startup. You should run the Startup protocol when you first start up the AssayMAP
Bravo Platform or before running any application protocol.
• Shutdown. You should run the Shutdown protocol after every application protocol
run, if the AssayMAP Bravo Platform will not be in use for 1 hour or longer, and
before shutting down the device overnight.
To access the utilities and their corresponding instructions, see the following section.
Accessing a workbench utility
To access a utility:
1 In the Protein Sample Prep Workbench, do one of the following:
• If you have not yet logged in, click Utility Library. The VWorks software starts,
and then the User Authentication dialog box opens.
Type your VWorks user name and password, and then click OK.
Note: The default login user name is administrator.
The default password is admini strator.
• If you have already logged in to the software, click the Utility Library button in
any of the other libraries of the Protein Sample Prep Workbench.
To Next Page
Loading...
Need help?
General
