Agilent Technologies FieldFox N9912A - Page 104

104 N9912A FieldFox User’s Guide
Channel power measurement with .22 RRC applied
RRC Weighting is set and enabled automatically when included in a selected
radio standard.
To set and enable RRC Weighting:
 Press Meas Setup 4
 Then RRC Weighting ON OFF
 Then More
 Then RRC Alpha [current setting]
 Enter a value between 0 (no smoothing) and 1 (most smoothing) using the
numeric keypad, ▲|▼ arrows, or the rotary knob. A standard level of filtering
is .22.
 Press Enter