Agilent Technologies FieldFox N9912A User Manual

168 N9912A FieldFox User’s Guide
Security Level
For security reasons, you can prevent frequency information from appearing on
the FieldFox while in SA, NA, or CAT modes.
How to set Security Level
 Press System 7
 Then System Configuration
 Then Security Level
 Then choose from the following:
o None All frequency settings are visible.
o High Frequency information is blanked from the following:
o Display annotation
o Softkeys
o Marker display and marker table
o Calibration properties
o All settings tables
o Limit line tables
o All saved .png files
o Any of the following will re-display frequency information:
o Set to None, Preset, Mode Preset, or FieldFox restart.
Date and Time, Format, and Time Zone Settings
Set the local date and time, Date and Time format, and Time Zone that is shown
on the FieldFox screen. The Date and Time is also used to identify files that are
saved.
If it is NOT saved with Preferences, then it is reset when the FieldFox is powered
OFF and ON.
The Date and Time can also be set by synchronizing with GPS satellites. Learn
more on page 165.
How to set Date and Time, Date and Time Format, and Time Zone
 Press System 7 .
 Then System Configuration.
 Then Date and Time.
 Press the ▲|▼ arrows to highlight the row to be edited.
 Then press Edit.
 Use the ▲|▼ arrows or rotary knob to select the field to be edited.
 Use the ▲|▼ arrows or numeric keypad to edit that field.
 Press Cancel or Done when the edits are complete.

Agilent Technologies FieldFox N9912A Specifications

General

Brand	Agilent Technologies
Model	FieldFox N9912A
Category	Measuring Instruments
Language	English