Agilent Technologies FieldFox N9912A - How to Enter Numeric Values

Preparing for Initial Use of Your New FieldFox 19
How to Enter Numeric Values
Many settings on the FieldFox require the entry of numeric values.
How to enter numeric values
Use any combination of the following keys:
 Numeric 0–9 keys, along with the polarity ( +/-) key.
 Up/Down arrow keys to increment or decrement values.
 Rotary knob to scroll through a set of values.
 Back erases previously entered values.
 Esc exits data entry without accepting the new value.
To complete the setting:
 Press Enter or a different softkey or hardkey.
Multiplier Abbreviations
Many times after entering numeric values, a set of multiplier or suffix softkeys
are presented. The following explains the meaning of these abbreviations.
Select Frequency multipliers as follows:
 GHz Gigahertz (1e9 Hertz)
 MHz Megahertz (1e6 Hertz)
 kHz Kilohertz (1e3 Hertz)
 Hz Hertz
Select Time multipliers as follows:
 s Seconds
 ms milliseconds (1e–3)
 us microseconds (1e–6)
 ns nanoseconds (1e–9)
 ps picoseconds (1e-12)