202 N9912A FieldFox User’s Guide
Certification and Compliance Statements
Certification
Agilent Technologies, Inc. certifies that this product met its published
specifications at the time of shipment from the factory. Agilent Technologies, Inc.
further certifies that its calibration measurements are traceable to the United
States National Institute of Standards and Technology, to the extent allowed by
the Institute's calibration facility, and to the calibration facilities of other
International Standards Organization members.
Manufacturer’s Declaration
This product has been designed and tested in accordance with accepted industry
standards, and has been supplied in a safe condition. The documentation
contains information and warnings that must be followed by the user to ensure
safe operation and to maintain the product in a safe condition.
Declaration of Conformity
Should the Declaration of Conformity be required, contact an Agilent Sales
Representative, or the closest Agilent Sales Office. See Contacting Agilent.
Compliance with German Noise Requirements
This is to declare that this instrument is in conformance with the German
Regulation on Noise Declaration for Machines (Laermangabe nach der
Maschinenlaermrerordnung –3. GSGV Deutschland).
Compliance with Canadian EMC Requirements
This ISM device complies with Canadian ICES–001.
Cet appareil ISM est conforme a la norme NMB du Canada.
Disposal of Batteries
Do not throw batteries away – collect as small chemical waste.
To Next Page
Loading...
