Agilent Technologies FieldFox N9912A User Manual

Interference Analyzer (SA Mode) - Option 236 117
 Then Recorder Player
 Then Record At the end of each 10 second record interval, the Max Hold trace
is recorded and the Max Hold processing is reset for the next 10 second record
interval.
 Then Stop to end the recording.
This session can be played back into any Trace State. For example:
Play the Max Hold recording into a Clear/Write trace to see the data exactly as
it was recorded.
 Press Trace 6 then with Trace = 1 and press State then Clr/Wr
 Then Record Player
 Then Play
Play the Max Hold recording into a Max Hold trace to show the accumulation of
“Max Hold” activity over the entire recording.
 Press Trace 6 then with Trace = 1 and press State then Max Hold
 Then Record Player
 Then Play

Agilent Technologies FieldFox N9912A Specifications

General

Brand	Agilent Technologies
Model	FieldFox N9912A
Category	Measuring Instruments
Language	English