Agilent Technologies Truevolt Series - Page 125

CALCulate:TRANsform:HISTogram:RANGe:{LOWer|UPPer}{<value>|MIN|MAX|DEF}
CALCulate:TRANsform:HISTogram:RANGe:{LOWer|UPPer}?[{MIN|MAX|DEF}]
Sets the histogram's lower and upper range values. Setting the lower or upper range value
(CALCulate:TRANsform:HISTogram:RANGe:{LOWer|UPPer) disables automatic selection of the lower and upper range
values (CALCulate:TRANsform:HISTogram:RANGe:AUTO OFF).
Parameter Typical Return
-1.0E+15 to -1.0E-15,
or
0.0 (default)
or
+1.0E-15 to 1.0E+15
+1.00000000E+06
See Example.
l If automatic range value selection is enabled (CALCulate:TRANsform:HISTogram:RANGe:AUTO ON), the query
returns the computed range value. If no histogram data exists, 9.91E37 (Not a Number) is returned.
l Lower and upper range values are computed automatically if CALCulate:TRANsform:HISTogram:RANGe:AUTO is
ON.
l This parameter is set to its default value after a Factory Reset (*RST) or Instrument Preset (SYSTem:PRESet).
CALCulate:TRANsform:HISTogram[:STATe]{ON|1|OFF|0}
CALCulate:TRANsform:HISTogram[:STATe]?
Enables or disables histogram computation.
Parameter Typical Return
{ON|1|OFF|0}, default OFF 0(OFF)or1(ON)
See Example.
l The instrument turns this setting OFF when the measurement function is changed or after *RST or
SYSTem:PRESet.
Agilent Truevolt Series DMM Operating and Service Guide 125