Agilent Technologies Truevolt Series - Page 237

SYSTem:WMESsage "<string>"
SYSTem:WMESsage?
Displays a power-on message.
Parameter Typical Return
A quoted string of up to 40 characters. You can use letters (A-Z), numbers (0-9) and
special characters such as @, %, *, and so forth.
Default ""
"RETURNTOJOEATPOST
D6"
Display a power-on message:
SYST:WMES "RETURN TO JOE AT POST D6"
l Specifying a null string ("") disables the power-on message.
l This setting is non-volatile; it is not changed by power cycling, a Factory Reset (*RST), or an Instrument Preset
(SYSTem:PRESet).
l This parameter is set to its default value when the instrument is shipped from the factory and after
SYSTem:SECurity:IMMediate.
Agilent Truevolt Series DMM Operating and Service Guide 237