SYSTem:COMMunicate:LAN:DNS[{1|2}] "<address>"
SYSTem:COMMunicate:LAN:DNS[{1|2}]? [{CURRent|STATic}]
Assigns static IP addresses of Domain Name System (DNS) servers. A primary and a secondary server address may be
assigned. If DHCP is available and enabled, DHCP will auto-assign these server addresses. These auto-assigned server
addresses take precedence over the static addresses assigned with this command. Contact your LAN administrator for
details.
If you change this setting, you must send SYSTem:COMMunicate:LAN:UPDate to activate the new
setting.
Parameter Typical Return
Command: "nnn.nnn.nnn.nnn", default "0.0.0.0"
Query: {CURRent|STATic}, default CURRent
"198.105.232.4"
Set a static primary DNS address:
SYST:COMM:LAN:DNS "198.105.232.4"
SYST:COMM:LAN:UPD
l CURRent: returns address currently being used by the instrument.
l STATic: returns static address from non-volatile memory. This address is used if DHCP is disabled or unavailable.
l SYSTem:SECurity:IMMediate sets this parameter to its default value.
l On the 34460A, this requires option 34460A-LAN or option 3446LANU.
l The assigned DNS server addresses are used if DHCP is disabled or unavailable. Otherwise, the DNS server
addresses are auto-assigned by DHCP.
l The DNS server addresses are stored in nonvolatile memory. They do not change when power has been off, after a
Factory Reset (*RST) or after an Instrument Preset (SYSTem:PRESet).
SYSTem:COMMunicate:LAN:DOMain?
Returns the domain name assigned to the instrument.
Parameter Typical Return
(none) "example.com"
Return the domain name being used by the instrument:
SYST:COMM:LAN:DOM?
l If Dynamic Domain Name System (DNS) is available on your network and your instrument uses DHCP, the domain
name is assigned by the Dynamic DNS service at power-on.
l A null string ("") indicates that no domain name is assigned.
l On the 34460A, this requires option 34460A-LAN or option 3446LANU.
Agilent Truevolt Series DMM Operating and Service Guide 241
To Next Page
Loading...
