Alcatel-Lucent 7330 - NTP 158 - Replace an I-211 M-H Indoor ONT

Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 158-1
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
NTP 158 — Replace an I-211M-H indoor
ONT
Purpose
This NTP provides the steps to replace an I-211M-H indoor ONT.
General
The DLPs listed in this NTP describe mounting and cabling for a replacement I-211M-H
indoor ONT.
Prerequisites
See the listed DLPs for prerequisites.
Recommended tools
You need the following tools for replacing the ONT:
• Phillips screwdriver
• TELCO 216 tool for securing either pin-in-hex bolts or 216 tamper-resistant screws
• wire strippers
• RJ-11 and RJ-45 cable plug crimp tools
• voltmeter or multimeter
• optical power meter