Alcatel-Lucent 7330 - Procedure 6-36 to Perform an OMCI Trace for a Package C ONT; Procedure 6-37 to Perform a Protocol Trace for a Package C ONT

6 — ONT management using an ONT interface
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 6-53
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Procedure 6-36 To perform an OMCI trace for a Package C ONT
1 Select the Omci Trace option from the ONT Admin section of the navigation tree
in the GPON ONT window.
The Omci Trace window appears; see Figure 6-30.
Figure 6-30 Omci trace window
2 Click Start to initiate an OMCI trace.
3 Perform one of the following tasks to stop an OMCI trace.
i Click Stop to end the OMCI trace.
ii Click Delete to end the OMCI trace and delete the trace file.
4 STOP. This procedure is complete.
Procedure 6-37 To perform a Protocol trace for a Package C ONT
1 Select the Protocol Trace option from the ONT Admin section of the navigation
tree in the GPON ONT window.
The Protocol Trace window appears; see Figure 6-31.