Alcatel-Lucent 7330 - NTP 130-1: I-010 G-U Indoor ONT Connections

NTP 130 — Install an I-010G-U indoor ONT
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 130-3
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
4 Locate and route each missing connection or each connection that needs to be
relocated to the ONT mounting area using your local practices. Some cables, such
as Ethernet, may need to be installed in the subscriber residence first.
5 Place the I-010G-U indoor ONT unit:
a On a flat surface, such as a desk, horizontally resting on its four plastic feet;
go to step 6.
b On a wall by sliding the I-010G-U indoor ONT unit over mounting screws
(DLP 122).
6 Connect the power converter to the ONT. Figure NTP 130-1 shows the I-010G-U
indoor ONT. Figure NTP 130-2 shows the I-010G-U indoor ONT 3FE 55284 AA
variant.
Figure NTP 130-1: I-010G-U indoor ONT connections
P
O
W
ER
ALARM
CONNECTION
ETH
PWR
ON/OFF
RESET
GE
SC/APC
connection
Ethernet
connection
Reset
button
Power
button
Power
connection
23529