Alcatel-Lucent 7330 - NTP 115 - Install a G-241 W-P or I-241 W-T Indoor ONT; Recommended Tools

Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 115-1
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
NTP 115 — Install a G-241W-P or
I-241W-T indoor ONT
Purpose
This NTP provides the steps to install an G-241W-P or I-241W-T indoor ONT.
General
The DLPs listed in this NTP describe mounting and cabling for G-241W-P and I-241W-T
indoor ONTs.
Prerequisites
See the listed DLPs for prerequisites.
Recommended tools
You need the following tools for the installation:
• #2 Phillips screwdriver
• 1/4 in. (6 mm) flat blade screwdriver
• wire strippers
• fiber optic splicing tools
• RJ-45 cable plug crimp tool
• voltmeter or multimeter
• optical power meter
• drill and drill bits