Alcatel-Lucent 7330 - I-010 G-B, I-020 G-M, and I-040 G-B Standards Compliance; Single-Residence Gigabit Ethernet ONT; I-010 G-B, I-020 G-M, and I-040 G-B Special Considerations; I-010 G-B, I-020 G-M, and I-040 G-B ONT Considerations and Limitations

15 — I-010G-B, I-020G-M, or I-040G-B unit data sheet
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 15-9
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Figure 15-3 Single-residence Gigabit Ethernet ONT
15.10 I-010G-B, I-020G-M, and I-040G-B standards compliance
I-010G-B, I-020G-M, and I-040G-B indoor ONTs are compliant with the following
standards:
• 802.1p mapper service profile on the upstream
• G.984 support for GPON interface (framing)
• G.984.3 support for activation with automatic discovery of a serial number and a
password
• G984.4 (standard and revised) support for OMCI interface for ONT management
and provisioning
15.11 I-010G-B, I-020G-M, and I-040G-B special considerations
The following special considerations should be observed.
Upgrade considerations and limitations
Existing ONTs that use 7342 ISAM FTTU releases older than R04.06.xx and
R04.07.xx must be upgraded to use R04.00.10 software while assigned to a PON ID
value smaller than 64. For this purpose, if split ratios larger than 1:64 are being
deployed, you may choose to set aside the first PON ID as a staging point.
I-010G-B, I-020G-M, and I-040G-B ONT considerations and limitations
Table 15-10 lists the considerations and limitations for these ONTs.
Power connector
RJ-45
RJ-45
RJ-45
RJ-45
20391
GPON
Optical
block
Power Converter
Ethernet (1)
Ethernet (1)
Ethernet (1)
Ethernet (1)
SOC