Alcatel-Lucent 7330 - G-010 V-P Connections and Components; G-010 V-P ONT Connections; G-010 V-P ONT Physical Connections

12 — G-010V-P unit data sheet
12-4 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
G-010V-P connections and components
G-010V-P ONTs are intended for deployment and can be installed horizontally or
vertically. These ONTs offer the following external interfaces:
• one VDSL ports (RJ-45) to CPE
• one VDSL ports (RJ-45) to the central office for use when the unit is not reverse
powered
• one fiber optic port for SC/APC connectors
• one power connection
• one local management port
• one external alarm connector
Figure 12-1 show the physical connections for G-010V-P ONTs.
Figure 12-1 G-010V-P ONT connections
Table 12-4 describes the physical connections on G-010V-P ONTs.
Table 12-4 G-010V-P ONT physical connections
Connection
(1)
Description
VDSL ports This connection is provided through a POTS RJ-45 port. One VDSL
connection is supported at a time. The VDSL connects to the CPE
through a PSE injector which provides reverse power to the unit.
The CO Line connector allows for the ONT to be configured before
being connected to the CPE and is active only when the unit is not
reverse powered.
Fiber optic port This connection is provided through an SFF type laser fiber optic
cable with SC/APC connector and port with SC/APC adapter.
(1 of 2)
CO Line
(RJ-45)
VDSL and
Reverse
Power (RJ-45)
SC/APC
Alarm
(RJ-45)
Power
connector
Local
management
(RJ-45)
23851
COLINE
CONSOLE
VDSL
PON
ALARM
POWE
R