Alcatel-Lucent 7330 - SIP Service Features

5 — VoIP overview
5-10 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
SIP service features
Table 5-2 lists the SIP service features on package A, B, and H ONTs and MDUs
supported by the two SIP modes and whether the service feature is configurable
using TL1 via OMCIv2. Not all features are supported for all SIP application servers.
Table 5-2 SIP service features
Service Description SIP
mode 1
SIP
mode 2
OMCIv2
Basic call Basic calling functions Y Y Some parameter such as
contact_uri must be
configured on the ONT
using XML.
Emergency number (911)
(1) (2)
Basic 911 support
Enhanced 911 support
Denial of feature use
Emergency ringback
Forced hold
Y
—
—
—
—
Y
Y
Y
Y
Y
Fully configurable
Call forwarding status
indications
(1)
Splash ring when a call is actually
forwarded
(2)
Stutter dial tone while call forwarding is
active
Implicit call forward status indicators for
FS 5000 softswitch cannot be configured
using TL1.
—
Y
Y
Y
Reminder ring
(2)
and
cfwd_event_uri must be
configured using XML.
Call hold (ANSI)
(1) (2)
Basic hold (flash hook supported)
Remote hold/network hold
Y
—
Y
Y
Fully configurable
Call hold (ETSI) Basic hold (flash hook supported)
Remote hold/network hold
(1)
Y
—
Y
Y
ETSI mode cannot be
configured using TL1.
Reverse polarity (ETSI)
(1)
— — Y ETSI mode cannot be
configured using TL1.
Tone of death (ETSI)
(1) (2)
— — Y ETSI mode cannot be
configured using TL1.
HF using INVITE
(1)
For FS 5000 softswitch interoperability Y — thin_client_HF_method is
only supported using XML.
Call transfer
Call park
(1) (2)
Blind and consultative call transfer
Call transfer attended and unattended
Y
—
Y
Y
Fully configurable
Call waiting (ANSI)
(1) (3)
Basic call waiting
Delivery of calling number and name
Cancel call waiting
Activate/deactivate/interrogate call
waiting
Y
Y
Y
Y
Y
Y
Y
Y
Fully configurable (except
for deactivation of call
waiting on package C, D, E,
F, and G ONTs)
Call waiting (ETSI)
(3)
Basic call waiting
Delivery of calling number and name
Cancel call waiting
(1)
Activate/deactivate/interrogate call
waiting
(1)
Y
Y
Y
Y
Y
Y
Y
Y
ETSI mode cannot be
configured using TL1.
(1 of 3)