Alcatel-Lucent 7330 - NTP 112-1: G-010 V-P ONT Connections; NTP 112-2: G-010 V-P ONT Installation

NTP 112 — Install a G-010V-P ONT
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 112-3
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Figure NTP 112-1: G-010V-P ONT connections
6 Connect the VDSL cables to the ONT.
i Connect the VDSL line from the CPE to the VDSL port using an RJ-45
connector, as shown in Figure NTP 112-1. Reverse power is provided to the
ONT through this connection using a PSE injector located on the customer
premises, as show in Figure NTP 112-2.
Figure NTP 112-2: G-010V-P ONT installation
ii Connect the VDSL line from the central office to the CO LINE port using an
RJ-45 connector. This line will be used only if the unit is not powered by the
CPE VDSL line.
CO Line
(RJ-45)
VDSL and
Reverse
Power (RJ-45)
SC/APC
Alarm
(RJ-45)
Power
connector
Local
management
(RJ-45)
23851
COLINE
CONSOLE
VDSL
PON
ALARM
POWER
23852
G-010V-P
OLT
Power
insertion
module
PSU
(PoE)
L
P
W
R
R
P
W
R
P
O
N
V
D
S
L
ALM
Customer
equipment
(
VDSL2)
Technical Area Customer Premises