Alcatel-Lucent 7330 - Digit Map Syntax, Collection Elements, and Samples for Package C, D, E, F, and G

5 — VoIP overview
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 5-77
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
This example:
• The example allows these type 1 service codes: *70/1170 and *52/1152. The
cancel call waiting and call hold service code parameters in the XML download
data must also be configured with these features codes for the features to work
properly.
• Allows these type 3 service codes: *67/1167, *82/1182, *88/1188, and *90/1190.
*67/1167 and *82/1182 can be entered together in any order and can be followed
by *88/1188 or *90/1190. This ordering may be important in some cases.
• All other service codes are type 2.
• S and R modifiers are used with most codes; however, the S modifier is not
required except for the type 1 codes.
• R modifiers are not necessary on the *70/1170 and *52/1152 codes, the ONT will
output correct tones as part of Type 1 processing.
• The E modifier in the example will cause special emergency call behavior in the
ONT if 911, 0911 or 1911 is dialed.
Digit map syntax, collection elements, and samples for package C, D,
E, F, and G
The ONT digit map is a pattern that guides digit collection and allows the user agent
to determine when dialing is complete. Digit maps can only be configured using
XML. The digit_map SIP parameter is used to set this pattern.
To apply a new dial plan, configure the dial plan and apply to both POTS ports. After
locking and unlocking the ONT, the new dial plan goes into effect.
White space in the digit map string is not significant. Characters are not case
sensitive.An enter key on the phone is used during digit collection to end the
collection and cause the call attempt to be made (INVITE sent). The enter key
detected by the ONT is configurable with the SIP provisioning enter_key parameter.
The default is “#”.
Vertical bar characters are used to create alternate patterns in the digit map. For
example 1 | 2| 3 means 1 or 2 or 3. Care must be taken to make alternative patterns
unambiguous when constructing a digit map.
Table 5-16 lists and describes the elements, symbols, and modifiers used in the ONT
digit map.