Alcatel-Lucent 7330 - NTP 146-1: I-021 G-P Indoor ONT Connections; NTP 146-2: I-241 G-Q Indoor ONT Connections

NTP 146 — Replace an I-021G-P or I-241G-Q indoor ONT
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 146-3
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Figure NTP 146-1: I-021G-P indoor ONT connections
Figure NTP 146-2 shows the connections for an I-241G-Q indoor ONT.
Figure NTP 146-2: I-241G-Q indoor ONT connections
3 Replace the ONT with a new unit:
a On a flat surface, such as a desk, substitute a replacement ONT for the old
ONT; go to step 4.
b On a wall.
i Slide the old ONT off of the mounting screws until the ONT is free of the
wall.
ii Install the replacement ONT following the wall mounting instructions
for I-021G-P and I-241G-Q indoor ONTs (DLP 122).
4 Connect the Ethernet cables to the RJ-45 ports (DLP 101).
5 For the I-241G-Q indoor ONT, connect the POTS cables to the RJ-11 ports
(DLP 123).
6 Connect the coaxial cable to the F-Type connector (DLP 116).
GE1
GE2
RESET
RF
PWR
PWR
TEST
GPON
VIDEO
LAN
Ethernet
ports
Reset
button
Power
connector
Fiber optic
connector
F-Type
coaxial
21589
GE1
GE2
RESET
RF
PWR
PWR
TEST
GPON
VIDEO
LAN
POTS
Ethernet
ports
Reset
button
Power
connector
Fiber optic
connector
F-Type
coaxial
POTS
ports
22657
GE1
GE2
POTS1
POTS2