Alcatel-Lucent 7330 - NTP 106-1: B-2404-P Business ONT Connections

NTP 106 — Install a B-2404-P business ONT
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 106-3
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Figure NTP 106-1: B-2404-P business ONT connections
5 Place the business ONT unit:
a On a flat surface, such as a desk, resting horizontally; go to step 6.
b On a wall.
i Determine where on the wall to mount the ONT. If possible, mount the
ONT on a wall stud.
ii Use a wall mounting template to mark the wall with the location of the
four mounting holes. These holes should be the same distance apart as
the distance between the holes molded into the fiber storage tray. For
the location of the wall mounting keyholes, see Figure NTP 106-2.
G
PO
N
PW
R
12VDC
2.5G
/1.25G
G
.984.2 B+
Class 1 Laser
B
A
POTS
22563
Reset
button
Ethernet
ports (RJ45)
E1/T1
ports
(RJ-48c)
POTS
ports
(RJ-11)
Fiber
optic connector
(hidden)
G
E
1
2
3
4
E1
1
2
3
4
Power
connector