Alcatel-Lucent 7330 - I-010 G-Q and I-010 G-S General Description; I-010 G-Q and I-010 G-S Software and Installation Feature Support; I-010 G-Q and I-010 G-S Indoor ONT Software Feature Support

17 — I-010G-Q and I-010G-S unit data sheet
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 17-3
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
17.2 I-010G-Q and I-010G-S general description
I-010G-Q and I-010G-S indoor ONTs provide a subscriber interface for the OLT.
The ONT terminates the PON interface and converts it to a user interface that directly
connects to subscriber devices. The ONT is compatible with all existing subscriber
equipment, including analog phones with both tone and rotary dial capabilities,
cordless phones, modems, fax machines, and caller ID boxes (Type I, Type II, and
Type III).
Voice, video, and data are supported by this ONT. Voice capability is supported
through the Ethernet interface using an interfacing external IAD box or home router
to enable VoIP access, transmitting voice as data. Video contents can be delivered in
the form of data by multicast or unicast technology. For example, where multicast
technology is used, this ONT supports a dedicated multicast GEM port on the
downstream so the video content is received and processed by the ONT through a
unified channel, which greatly improves bandwidth efficiency. IGMP snooping is
also supported for further optimization. When IGMP snooping is enabled, the
member joining and leaving activities are monitored by the ONT at the Ethernet
service port, then selectively delivered the multicast streams.
This ONT provides the following functions:
• fully G.984 series GPON standard compliant
• IGMP snooping
• support for Multicast GEM port
• G984.4 and G.983.2 standard-compliant ONT Management Control Interface
(OMCI) for ONT management and provisioning
• auto-negotiation and MDI/MDIX auto-sensing
• Management Information Base (MIB) manipulation over OMCI by Create,
Delete, Set, Get, and GetNext commands
• optics that support received signal strength indication (RSSI)
• remote software image download (as well as activation and reboot) over OMCI
• delivers video content in the form of data by multicast or unicast
• performance monitoring as well as alarms and AVC reports
17.3 I-010G-Q and I-010G-S software and installation feature
support
Table 17-2 provides a list of software-based features and installation information
supported by I-010G-Q and I-010G-S indoor ONTs.
Table 17-2 I-010G-Q and I-010G-S indoor ONT software feature support
Features Chapter Cross reference for more information
General ONT and MDU
overview
General information common to
multiple devices and an explanation
of general system behaviors.
ONT and MDU overview
(1 of 2)