Alcatel-Lucent 7330 - Procedure 6-33 to Specify Logging Option

6 — ONT management using an ONT interface
6-50 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
Procedure 6-33 To specify logging option
1 Choose option 9, Enable protocol traces, from the Secondary menu. The
following menu of options appears:
Please select protocol
===============
1. OMCI
2. DHCP
3. ARP
4. IGMP
5. Logging options
Enter choice :
2 Choose option 5, Logging options. The following menu of options appears:
When log file size limit is reached, what do you want to do:
===============
1. Append
2. Stop logging
Enter choice :
3 Choose one of the following actions for the system to take when the log file is full:
a Choose option 1, Append, to create a second log file when the first log file
is full. The content of this second log file will be appended to the content of
the first log file when you view the log files, using Procedure 6-31.
b Choose option 2, Stop logging, to create only one log file.
The following message appears:
Press enter key to continue...
4 Press ↵ to continue. The Secondary menu appears.
5 STOP. This procedure is complete.
Note — The log file is not permanently stored on the ONT, and can be
lost after an ONT is powered off and on, or is reset.