Alcatel-Lucent 7330 - Naming Designation for Mdus

2 — Part numbers, ordering, and deployment configuration overview
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 2-49
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
For example, I-241W-P identifies the following information:
• I – indoor ONT
• 2 –two POTS interfaces
• 4 –four data interfaces
• 1 –one RF video interface
• W –Wi-Fi service
• P –variant
Table 2-4 provides the designation for MDUs.
Table 2-4 Naming designation for MDUs
For example, O-0881V-A identifies the following information:
• O – MDU
• 0 –no POTS interfaces
• 8 –eight data interfaces
• 8 –eight VDSL interfaces
Character after the third
digit
The type of data service supported. The codes for the supported types
are:
• E for 10/100BASE-T Ethernet
• G for 10/100/1000Base-T Ethernet
• H for HPNA (IP over coaxial cable)
• M for MoCA and 10/100/1000Base-T Ethernet
• S for SFP ONTs
• V for VDSL
• W for Wi-Fi service
Ending character The variant
Position in mnemonic Description
Beginning character The series that the product belongs to
First digit after the dash The number of POTS interfaces
Second digit after the dash The number of data interfaces
Third and fourth digit after
the dash
The number of VDSL interfaces
Fifth digit after the dash The number of RF interfaces
Character after the last
digit
The type of data service supported. The codes for the supported types
are:
• E for 10/100BASE-T Ethernet
• G for 10/100/1000Base-T Ethernet
• V for VDSL
• M for MoCA and 10/100/1000Base-T Ethernet
Ending character The variant
Position in mnemonic Description
(2 of 2)