EasyManua.ls Logo

Alcatel-Lucent 7330 - Page 422

Alcatel-Lucent 7330
1073 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 — VoIP overview
5-76 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
The following is an example of a digit map used with SIP mode 1:
*x{20} | #x{20} | 411 | 911 | [01235678]x{20} | [49] ([^1]x{19} |
1[^1]x{19})
This example:
Allows for up to 20 digits to be entered following * or # for service codes
411 or 911 can be entered and digit map collection will stop immediately.
Allows a dialed number (without a service code) of up to 20 digits, with
exclusions to make sure the different patterns are unique for 411 and 911.
This example forces the subscriber to use the enter key or wait for timeout to dial
a simple service code or phone number (except for 411 or 911).
The interdigit timeout with this Digit Map should be configured to 4 seconds
(normally it is 16 seconds).
The following is an example of a digit map used with SIP mode 2:
( ( * | 11 ) ( 67 | 82 ) ) SRI# {0,2} ( ( * | 11 ) ( 70 ) ) S I# ? (
101xxxx ) ? ( ( * | 11 ) 52 ) S I# ? ( ( * | 11 ) ( 88 | 90 ) ) R I#
? ( ( ( * | 11 ) ( [23]xx | [014]x | 5[^2] | 6[^7] | 7[^0] | 8[01345679]
| 9[^0] ) ) S I# | ( 0T | 00 | 011?[2-9]x{0,14}T | [01] ( [2-8] 11 |
(911)E | [2-9] ( [^1]x{8} | 1[^1] x{7}) ) | [2-8] 11 | (911)E | [2-9]
( [^1]x{5} | 1[^1] x{4}) | [2-9] [^1]?T ) )
I The I modifier represents the insertion of a special digit character
(such as #) into the collected digit string immediately following the
substring that matches the pattern element that is followed by the
I modifier. The inserted character is specified immediately
following the I in the pattern.
E The E modifier specifies the substring that matches the pattern
element before it as an emergency call. The pattern element
generally is a sequence of pattern elements enclosed in
parentheses.
R The R modifier specifies that a recall dial tone should be output
after a particular pattern is performed.
S The S modifier specifies the substring that matches the pattern
element before it as service code that may be of interest to the user
agent. The pattern element generally is a sequence of pattern
elements enclosed in parentheses. This use of this symbol is not
supported in SIP mode 1.
Pattern elements, symbol, or
modifier
Representation
(2 of 2)
Note 1 — Alphabetic symbols in the ONT digit map are not case
sensitive.
Note 2 — The digit_map SIP parameter is a required parameter; it has
no default value. A digit map must be customized for each SIP
implementation based on the features of the SIP server in the network.

Table of Contents

Other manuals for Alcatel-Lucent 7330

Related product manuals