EasyManua.ls Logo

Alcatel-Lucent 7330 - Page 373

Alcatel-Lucent 7330
1073 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 — VoIP overview
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 5-27
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
RegistrarRou
teSec
(1)
(3)
Optional parameter that indicates
the address of the server or proxy to
which REGISTER requests are sent. It
is a numeric IP address. The default
is a null string.
Can use the form
xxx.xxx.xxx.xxx:port, where
xxx.xxx.xxx.xxx is the IP address and
port is the port number from
transport_protocol
YYSome
package
C,
package
D, and
package
E MDUs
No N/A
register_per
iod
(1)
The registration expiration time that
the client will propose by including it
in an Expires header of a REGISTER
request. This is a non-negative
integer and the value is expressed in
seconds. The default value is 3600.
YYAllYesTL1 using
REGEXPTIME using
ent-ontsip-config
CLI using
reg-expire-time
using
configure voice
ont sip-config
register_hea
d_start
(1)
The number of seconds prior to
expiration of a registration at which
the client sends a REGISTER request
to refresh the registration. This is a
non-negative integer and the value is
expressed in seconds. The default
value is 60.
Y Y All Yes,
default
value in
TL1 and
CLI is 360
seconds.
TL1 using
REREGHEADSTRT
using
ent-ontsip-config
CLI using
re-reg-head-start
using
configure voice
ont sip-config
register_retr
y_interval
(1)
The interval between successive
registration retries after a failed
registration retry. The value is
expressed in seconds. The range is
zero (0) to 65535 and zero (0)
disables registration. The default
value is 60.
YYAllNo, value
is derived
from
FTP/defau
lt line
profile.
N/A
Parameter Description Mode
1
Mode
2
Device OMCIv2
support?
TL1 and CLI
parameters
(2 of 7)

Table of Contents

Other manuals for Alcatel-Lucent 7330

Related product manuals