Alcatel-Lucent 7330 - Page 378

5 — VoIP overview
5-32 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
SIP_poundke
y_escape
The parameter determines whether
the # key is translated to %23 (per
RFC2361) or is not translated per
request by China operators.
When set to true, translate to %23.
When set to false, no translation
(report # directly).
YYAll
except
package
C, D,
and E
No, value
is derived
from
FTP/defau
lt line
profile.
N/A
dns_redun_
mode
The DNS server selection mode.
• dns_redun_primary: Any new
DNS look-up request gets always
sent to the highest priority DNS
server irrespective of whether
the previous DNS look-up request
got replied by the highest
priority DNS server or not.
• dns_redun_at_successful: A new
DNS look-up request gets sent to
the DNS server that successfully
replied to the previous DNS
look-up request. This DNS server
remains addressed for as long as
a reply gets received from this
DNS server during the initial
retransmission interval.
YYPackage
L ONTs
only
YN/A
dns_ini_retr
_int
The initial retransmission time
interval after which the DNS resolver
will send the first retransmission for
the DNS look-up request.
Use an integer value from 200 to
1000 ms.
YYPackage
L ONTs
only
YN/A
dns_max_re
tr_nbr
The maximum number of DNS
look-up retransmissions to be
addressed to the same DNS server in
case of no response. The
retransmission algorithm is based on
an initial transmission of the query
and a number of retransmissions.
Use an integer value from 0 to 4.
YYPackage
L ONTs
only
YN/A
dns_purge_t
imer
The DNS purge timer intends to
overrule the TTL value in case the
latter value would be set to an
excessively long time.
The maximum resource record
caching time equals:
RR caching time = MIN [DNS purge
timer; MINTTL]
Whereby MINTTL = MIN {[TTL
NAPTR]*; [TTL SRV]*; [TTL A]*}
The DNS purge timer gets disabled
when set to the value “0”.
In this case the maximum resource
record caching time equals:
RR caching time = MINTTL = MIN
{[TTL NAPTR]*; [TTL SRV]*; [TTL A]*}
Use an integer value from 0 to 86400
s.
YYPackage
L ONTs
only
YN/A
Parameter Description Mode
1
Mode
2
Device OMCIv2
support?
TL1 and CLI
parameters
(7 of 7)