Alcatel-Lucent 7330 - Page 504

6 — ONT management using an ONT interface
6-72 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
UPnPEnable Specifies whether LAN uPnP is enabled or
disabled. The options are:
• enable (default)
• disable
<LANUPnPConfig
UPnPEnable="enable"/>
—
Security configuration
FTP Specifies whether FTP service is enabled or
disabled from the WAN. The options are:
• enable
• disable (default)
<Security>
<WANServiceACL FTP="disable"
HTTP="disable"
TELNET="disable"
SSH="disable"/>
Not currently
supported
HTTP Specifies whether HTTP service is enabled
or disabled from the WAN. The options are:
• enable
• disable (default)
—
TELNET Specifies whether TELNET service is enabled
or disabled from the WAN. The options are:
• enable
• disable (default)
Not currently
supported
SSH Specifies whether SSH service is enabled or
disabled from the WAN. The options are:
• enable
• disable (default)
—
LAN service ACL configuration
FTP Specifies whether FTP service is enabled or
disabled from the LAN. The options are:
• enable
• disable (default)
<LANServiceACL FTP="disable"
HTTP="enable" />
Not currently
supported
HTTP Specifies whether HTTP service is enabled
or disabled from the LAN. The options are:
• enable (default)
• disable
—
Wireless WiFi configuration
wifiNetMode Specifies the WiFi mode for the device. The
options are:
• mixed for 802.11b/g/n
• disable for no WiFi (default)
<Wireless>
<WifiNetwork
wifiNetMode="mixed"
WiFiChBW="auto"
wifiNetChannel="auto"
wifiWideNetCh="auto" />
—
WiFiChBW Specifies the WiFi channel bandwidth. The
options are:
• auto (default)
• 20
• 40
—
wifiNetChannel Specifies the net channel. When WiFiChBW
is set to auto, the option is auto. When
WiFiChBW is set to 20, the options are 1, 2,
3, 4, 5, 6, 7, 8, 9, 10, 11, 12, or 13. When
WiFiChBW is set to 40, the options are auto
or the wifiWideNetCh value plus or minus 2.
—
wifiWideNetCh Specifies the wide net channel. You can
specify the parameter when the
wifiNetChannel is set to 40. The options are
auto, 3, 4, 5, 6, 7, 8, 9, 10, 11
—
XML parameter Parameter values Sample XML Information
(4 of 6)