Alcatel-Lucent 7330 - Page 56

Contents
lvi November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
I-021G-P, I-241G-Q
23 — I-021G-P and I-241G-Q unit data sheet 23-1
23.1 I-021G-P and I-241G-Q part numbers and identification ......................... 23-2
23.2 I-021G-P and I-241G-Q general description ........................................ 23-2
23.3 I-021G-P and I-241G-Q software and installation feature support ............. 23-3
23.4 I-021G-P and I-241G-Q interfaces and interface capacity ....................... 23-3
23.5 I-021G-P and I-241G-Q LEDs .......................................................... 23-5
23.6 I-021G-P and I-241G-Q detailed specifications .................................... 23-8
23.7 I-021G-P and I-241G-Q GEM ports and T-CONTs ................................... 23-9
23.8 I-021G-P and I-241G-Q power support .............................................. 23-9
23.9 I-021G-P and I-241G-Q functional blocks ......................................... 23-10
Single-residence Gigabit Ethernet Package C ONTs with RF video and
without POTS ................................................................ 23-11
Single-residence Gigabit Ethernet Package C with POTS, Ethernet,
and RF video ................................................................. 23-11
23.10 I-021G-P and I-241G-Q standards compliance ................................... 23-12
23.11 I-021G-P and I-241G-Q special considerations ................................... 23-12
Upgrade considerations and limitations ....................................... 23-12
I-021G-P and I-241G-Q ONT considerations and limitations ................ 23-12
NTP 145 — Install an I-021G-P or I-241G-Q indoor ONT NTP 145-1
Purpose ........................................................................ NTP 145-1
General ........................................................................NTP 145-1
Prerequisites ..................................................................NTP 145-1
Recommended tools ......................................................... NTP 145-1
Safety information ...........................................................NTP 145-2
Procedure .....................................................................NTP 145-2
NTP 146 — Replace an I-021G-P or I-241G-Q indoor
ONT NTP 146-1
Purpose ........................................................................ NTP 146-1
General ........................................................................NTP 146-1
Prerequisites ..................................................................NTP 146-1
Recommended tools ......................................................... NTP 146-1
Safety information ...........................................................NTP 146-2
Procedure .....................................................................NTP 146-2
NTP 147 — Configure an I-021G-P or I-241G-Q indoor
ONT NTP 147-1
General ........................................................................NTP 147-1