NTP 119 — Replace an I-010G-A indoor ONT
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 119-3
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
10 Make the fiber optic connection as shown in Figure NTP 119-1.
11 Verify the ONT LEDs, voltage status, and optical signal levels (DLP 127).
12 Activate and test the services (DLP 128).
13 STOP. This procedure is complete.
Warning — Be careful to maintain a bend radius of no less than 1.5
inches (3.8 cm) when connecting the fiber optic cable. Too small of a
bend radius in the cable can result in damage to the optic fiber.
To Next Page
Loading...
