NTP 121 — Install an I-010G-B, I-020G-M, or I-040G-B indoor ONT
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 121-7
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
11 If used, configure the SLID (DLP 129).
12 Verify the ONT LEDs, voltage status, and optical signal levels (DLP 127).
13 Activate and test the services (DLP 128).
14 If necessary, reset the ONT (DLP 126).
15 STOP. This procedure is complete.
To Next Page
Loading...
