Filter Configuration Command Reference
514 Router Configuration Guide
— flow-label flow-label [mask]
—no flow-label
— fragment {true | false | first-only | non-first-only}
—no fragment
— hop-by-hop-opt {true | false}
—no hop-by-hop-opt
— icmp-code icmp-code
—no icmp-code
— icmp-type icmp-type
—no icmp-type
— port {lt | gt | eq} port-number
— port port-list port-list-name
— port range port-number port-number
—no port
— routing-type0 {true | false}
—no routing-type0
— src-ip{ipv6-address/prefix-length | ipv6-address ipv6-address-mask |
ipv6-prefix-list prefix-list-name}
—no src-ip
— src-port {lt | gt | eq} src-port-number
— src-port port-list port-list-name
— src-port range src-port-number src-port-number
—no src-port
— tcp-ack {true | false}
—no tcp-ack
— tcp-syn {true | false}
—no tcp-syn
— pbr-down-action-override {drop | forward | filter-default-action}
—no pbr-down-action-override
— sticky-dest hold-time-up
— sticky-dest no-hold-time-up
—no sticky-dest
— filter-name filter-name
—no filter-name
— renum old-entry-id new-entry-id
— scope {exclusive | template | embedded | system}
—no scope
— shared-radius-filter-wmark low low-watermark high high-watermark
—no shared-radius-filter-wmark
— sub-insert-credit-control start-entry entry-id
count count
—no sub-insert-credit-control
— sub-insert-radius start-entry entry-id count count
—no sub-insert-radius
— sub-insert-shared-pccrule start-entry entry-id count count
—no sub-insert-shared-pccrule
— sub-insert-shared-radius start-entry entry-id count count
—no sub-insert-shared-radius
— sub-insert-wmark low low-watermark high high-watermark
—no sub-insert-wmark
To Next Page