Anilam Wizard 900 - Page 170

164
DAC Output Voltage ON/OFF
(900 With CSS and I/O Options) – F 50
F 50 allows you to turn the DAC output voltage ON or OFF:
To turn the DAC output voltage ON or OFF:
1. Press
The DRO displays one of the following in the message window:
DAC off
DAC
OUt on
2. Press
+
_
to turn the DAC output
voltage ON or OFF.
NOTE: Do not turn the spindle ON or OFF using F 50. The machine should have a
separate switch for this purpose.