iPAM400 – Product Manual
U-0629-0171.doc – Issue: 04 complete, approved
Page 115 of 138
12. Wait a moment for the configuration to occur.
13. The iPAM400 is now loaded with the required iPAM400 configuration.
14. Return to the main menu, if not already done.
15. Choose the “Test” option, then the “Copy logs and configs to stick” option in order to copy
the log and configuration files stored in the iPAM400 to the root directory of the memory stick.
This option will copy all log files in the iPAM400 RAM Disk and all configuration files stored in the
iPAM400 to the root directory of the memory stick. These include the currently installed
configuration file and all the previously installed configuration files. It is recommended that a copy of
these configuration files be stored in a safe place, so that the configuration can be restored when
required.
16. Choose “Exit” from the main menu by entering “X” in order to close and exit the Setup Tool.
17. Log out by entering “logout”.
18. Remove the USB memory stick, monitor, and keyboard.
19. The iPAM400 is ready for operation after testing to confirm that the replacement works properly.
To Next Page
Loading...
