iPAM400 – Product Manual
U-0629-0171.doc – Issue: 04 complete, approved
Page 71 of 138
6.3.1.3.3 Updating or Restoring the System Configuration the Using the Configuration Directory
The currently installed system configuration file and all the previously installed configuration files are
stored in the iPAM400 configuration directory (/dva/config/). Thus this directory is selected for
restoring a system configuration when required, for example when a system configuration update is not
successful.
This option enables the system configuration to be restored either remotely or locally.
To Restore an iPAM400 System Configuration:
1. Run the Setup Tool as follows, if not already running.
a. Connect to the iPAM400 either remotely or locally, as described in Section “6.2 Connecting to
the iPAM400” (page 59).
b. Run the Setup Tool by entering the following command: /dva/bin/vipet_setup
2. Choose the “Configure” from the main menu by entering “3”.
3. Choose the “Config directory” from the configuration menu by entering “1”.
4. A list of all configuration files (*.cfg file) available in the configuration directory will be shown.
5. Choose the required configuration by entering its option number.
A list of iPAM400 units will be shown. The configuration file can contain the configuration of more
than one iPAM400 unit.
6. Select the iPAM400 being configured by entering its option number.
7. Wait a moment for the configuration to occur.
8. The current menu options will be shown for further selections.
9. It is possible to restore the previous installed system configuration by repeating this procedure for
the previously installed configuration. You can also do this by using a USB memory stick (“6.3.1.3.1
Updating or Restoring the System Configuration Using a USB Memory Stick”, page 69), or the
iPAM400 RAM Disk (“6.3.1.3.2 Updating or Restoring the System Configuration Using the RAM Disk”,
page 70).
10. If no further tasks are to be performed, then return to the main menu (if not already done) and enter
“X” to exit the Setup Tool.
To Next Page
Loading...
Need help?
General
