iPAM400 – Product Manual
U-0629-0171.doc – Issue: 04 complete, approved
Page 73 of 138
6.3.1.4.2 Safeguarding the ALSA Audio Settings
In order to prevent inadvertent changes to the ALSA (Advanced Linux Sound Architecture) configuration it is
recommended that the audio configuration be safeguarded after system commissioning
1
. This will ensure
that the audio configuration will be restored after any system reboot.
To Safeguard the ALSA Audio Settings:
1. Run the Setup Tool as follows, if not already running.
a. Connect to the iPAM400 either remotely or locally, as described in Section “6.2 Connecting to
the iPAM400” (page 59).
b. Run the Setup Tool by entering the following command: /dva/bin/vipet_setup
2. Choose the “System Setup” from the main menu by entering “4”.
3. Choose the “Audio Setting” from the system setup menu by entering “2”.
4. Choose the “Alsa Master Snapshot” from the menu by entering “1” in order to save the current
audio configuration, which will be restored every time the iPAM400 is rebooted.
5. If no further tasks are to be performed, then return to the main menu (if not already done) and enter
“X” to exit the Setup Tool.
1
ALSA settings are pre-configured and they do not normally require user adjustments. Refer to ASL for ALSA setup instructions, if
required.
To Next Page
Loading...
Need help?
General
