iPAM400 – Product Manual
Copyright © 2010 Application Solutions (Safety and Security) Limited
Application Solutions (Safety and Security) Limited
Unit 17 Cliffe Industrial Estate
Lewes - East Sussex
BN8 6JL - UK
Tel: +44(0)1273 405411 Fax: +44(0)1273 405415
www.asl-control.co.uk
All rights reserved.
Information contained in this document is believed to be accurate, however no representation or warranty is given and Application
Solutions (Safety and Security) Limited assumes no liability with respect to the accuracy of such information.
U-0629-0171.doc – Issue: 04 complete, approved
Page 2 of 138
This equipment is designed and manufactured to conform to the following EC standards:
EMC: EN61000-6-4:2007, EN61000-6-2:2005, EN55103-1/E1:1996,
EN55103-2/E5:1996, EN50121-4:2006, ENV50204:1995
Safety: EN60065:2002
Failure to use the equipment in the manner described in the product literature will
invalidate the warranty.
A ‘Declaration of Conformity’ statement to the above standards, and a list of auxiliary
equipment used for compliance verification, is available on request.
This product must be disposed of in accordance with the WEEE directive.
To Next Page
Loading...
Need help?
General
