iPAM400 – Product Manual
U-0629-0171.doc – Issue: 04 complete, approved
Page 52 of 138
Warnings (Figure 20):
1) ACCESS REQUEST:
Input “DI
y
” can be any of the available digital inputs of the BMB01 (DI1 to DI12).
2) BUSY:
Output “DO
n1
” can be any of the available digital outputs of the BMB01 (DO1 to DO12).
3) ACCESS GRANTED:
Output “DO
n2
” can be any of the available digital outputs of the BMB01 (DO1 to DO12).
4) 24 V for open-collector digital outputs can be from an external source.
Notes (Figure 20):
1) The Auxiliary DC Output (AUX OUT) can alternatively be used to power the BMB01.
2) Refer to the BMB01 user documentation for details; see Table 7 (page 132).
3) Cabling requirements: see Section “4.2.2 External Cabling Requirements” (page 29).
4) Refer to Section “6.1 Generating a Configuration File” (page 59) for configuration details.
To Next Page
Loading...
