ASTRO VG-873 - Page 91

Chapter 4 INTERFACE SETTINGS
73
This is the IT Content (whether the transmitted images are IT content) setting.
0 No data
(21)
IT content
1 IT Content
This is the IT Content Type setting.
0
Graphics
1
Photo
2
Cinema
(22)
IT content Type
3
Game
This is the checksum setting.
0
Auto
The value is calculated automatically.
Manual
(23)
Checksum
1
00h - 0FFh
The desired value is set.
(24)
Length 0 - 15 [byte]
This is the AVI InfoFrame length setting.
(Packet Header and Checksum are not
included.)
The default is 13 bytes.
Note: it is not available in VM-1823.
(25)
Data Byte 14, 15 00h - 0FFh
This is the data byte 14 and 15 value setting.
Note: it is not available in VM-1823.
*1
*1: The Checksum, Length and Data byte 14,15 settings are optional. They can be set only when the requisite
license has been registered. When it has not been registered, the Checksum setting is fixed at Auto and the
Length setting at 13 bytes.