Atlas Copco FOCUS 61

Focus 61 User Guide Introduction
13 (118) 9839 0211 01 Edition 2.0
Country
Number
Channel
Frequency [MHz]
Data rate [bit/s]
18
114
926.000
19200
19
115
926.200
19200
20
116
926.600
19200
21
117
926.800
19200
22
118
927.600
19200
NOTE: This device may not accept interference in the band 520 – 700 MHz, including
interference that may cause undesired operation.
ENVIRONMENTAL CONDITIONS
Comply with the following environmental conditions during the operations:
• Indoor Use ONLY
• Environmental Class: II
• IP Index according to EN IEC 60529: IP21
• Room Temperature: 5 °C to 40 °C (41 °F to 104 °F)
• Maximum relative humidity 80% for temperature up to 31 °C (88 °F) decreasing linearly to 50%
relative humidity at 40 °C (104 °F)
• Altitude: Up to 2000 m
REQUIREMENTS TO INSTALL ToolsTalk BLM
Below are the PC minimum requirements for installation of Focus 61 Management Software (ToolsTalk
BLM):
• Processor: 800 MHz or above
• Memory: 256 MB or above
• Hard disk space: 1 GB
• Display: 1024 x 768, High Color (16-bit)
• Operating Systems: Windows 7, Windows 8.1, Windows 10
• Microsoft Excel (required to view the exported file with the tightening results).