Focus 61 User Guide Programming Focus 61
39 (118) 9839 0211 01 Edition 2.0
The Jobs start:
- automatically when the Focus 61 turns on;
- when a barcode string;
- when an AOP command give an external signal;
- when “out of cradle” event is selected.
The Focus 61 Controller can handle only one Barcode Scanner.
It is possible to connect more than one Stacklight (or other compatible components) with the Focus 61, if
the connected I/O Device forwards the I/O Bus physically.
Connect ToolsTalk BLM with the Focus 61 (refer to paragraph Connecting with the Focus 61).
In the Device Files area, there are the Station(s) with the
associated Jobs:
The following paragraphs describe step-by-step how to configure Stations, Psets, Jobs and Events, and
how to associate the MRW with Station(s).
To Next Page
Loading...
