Atlas Copco PowerMACS 4000 User Manual

Tightening
298 9836 3521 01
T or A
Run spindle, in DIR direction, until the first of either Torque TC or Angle is reached.
Parameter A start cond. controls from where Angle is measured. See description on
following page for possible values.
Diagram:
Angle
Torque
TC Torque TC
A Target Angle
TC
A
Step

Atlas Copco PowerMACS 4000 Specifications

General

Brand	Atlas Copco
Model	PowerMACS 4000
Category	Power Tool
Language	English