Atlas Copco PowerMACS 4000 User Manual

Peripheral Devices
9836 3521 01 427
You must also configure the PLC drivers used for accessing the PLC data. This is done using the I/O
Configuration dialogue which is invoked by double-clicking on the icon for IO_Configuration worksheet of
station in question in the Project Tree.
In the /O Configuration dialogue select the I/O Group CYCLE_in located on the tab marked INPUT and
press the Properties button.

Atlas Copco PowerMACS 4000 Specifications

General

Brand	Atlas Copco
Model	PowerMACS 4000
Category	Power Tool
Language	English