Atlas Copco PowerMACS 4000 User Manual

Peripheral Devices
494 9836 3521 01
Then select the OUTPUT tab in the I/O Configuration dialogue, select the I/O Group SHARED_out and
press the Properties button. The group name has no functionality, therefore the group can be named
anything.
Set up address, length and driver parameter the same way as for the input driver. For both input and
output driver, the address should be 30000, driver name should be SHARED. The length can differ based
on how much data is needed for input and output variables.

Atlas Copco PowerMACS 4000 Specifications

General

Brand	Atlas Copco
Model	PowerMACS 4000
Category	Power Tool
Language	English